High carbon steel contains carbon within what percentage_________________?
Show answer Hide answer
Answer: D. 0.8 to 1.5%
Explanation
High carbon steels contain carbon concentrations ranging from 0.8 percent to 1.5 percent by weight. This higher carbon content enables extensive martensitic transformation during heat treatment, producing extreme hardness. Microstructures in this carbon range feature high fractions of cementite, providing exceptional wear resistance. Carbon steels are categorized into low, medium, and high carbon classes based on their weight percentages. Iron-carbon phase diagrams map the eutectoid composition at 0.8 percent carbon where pearlite forms exclusively. Exceeding 1.5 percent carbon leads to brittle free cementite networks that degrade mechanical impact strength.
Carbon ranges from 0.1 to 0.3 percent describe low carbon structural steels used for welding and sheet metal. Percentages between 0.3 and 0.6 percent represent medium carbon steels used for forged automotive shafts. Concentrations above 2.5 percent cross into cast iron territory rather than high carbon engineering steels.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Which substance is anticipated to have the highest thermal conductivity_______________?
Show answer Hide answer
Answer: B. solid ice
Solid ice features an ordered crystalline lattice that conducts phonons more efficiently. Liquid water molecules experience randomized motion which disrupts rapid thermal conduction. Consequently, solid ice exhibits a hi...
Q2. Fuel heating values are measured on an as-fired basis; converting dry-fuel values to as-fired requires multiplying by___________________?
Show answer Hide answer
Answer: A. (1- moisture content)
Converting dry-fuel heating values to an as-fired basis requires accounting for the diluting mass of water. Multiplying the dry value by one minus the moisture content fraction corrects for the inert moisture mass. Water...
Q3. Per fan laws, maintaining constant speed and capacity causes pressure and power to vary_____________________?
Show answer Hide answer
Answer: A. directly as the air or gas density
Fan laws state that for a constant fan speed and volumetric capacity, pressure and power vary directly with density. If the inlet gas density increases, the pressure developed and power required increase proportionally b...
Q4. Per fan laws, at a constant mass flow of gas or air, speed, capacity, and pressure vary________________?
Show answer Hide answer
Answer: C. inversely as density
Fan laws dictate that at constant mass flow, capacity and pressure vary inversely with density. Changes in ambient air density require speed adjustments to maintain constant mass flow rates. Mathematical fan scaling equa...
Q5. A standard hydraulic intensifier is composed of__________________?
Show answer Hide answer
Answer: C. two co-axial rams and two cylinders
A standard hydraulic intensifier utilizes two co-axial rams and two distinct fluid cylinders to multiply pressure. Low-pressure fluid acts on a larger ram area to drive a smaller ram generating high-pressure output. This...
Q6. Heating wet steam isothermally equates to heating at constant_________________?
Show answer Hide answer
Answer: B. pressure
For a pure substance inside the wet steam saturation region, temperature and pressure are strictly interdependent. Holding the saturation temperature constant during a phase change automatically maintains constant satura...