Lower load operations make this engine choice more economical_______________?
Show answer Hide answer
Answer: B. C.I. engine
Explanation
Compression ignition engines maintain higher thermal efficiency at part loads compared to spark ignition engines. C.I. engines control power output by varying fuel injection quantities while maintaining unthrottled air induction. This unthrottled operation avoids the pumping losses that plague spark ignition engines at low load settings. Compression ignition engines ignite diesel fuel through high air compression temperatures without spark plugs. Spark ignition engines regulate airflow using a throttle valve which creates pumping losses during partial loads. Part load efficiency is a critical economic factor for vehicles and generators operating intermittently.
Commercial trucks and heavy transport vehicles utilize diesel compression ignition engines for superior fuel economy. Stationary power generators running at variable loads often choose C.I. engines for lower operational costs. Automotive engineers continue developing technologies to improve part load efficiency in petrol spark ignition engines. Option A is incorrect because spark ignition engines suffer from pumping losses and lower efficiency at partial loads. Option C is wrong as C.I. and S.I. engines exhibit distinctly different part load efficiency characteristics. Option D and E do not address the fundamental thermodynamic efficiency differences between engine types.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. To measure flow accurately, a venturimeter must be mounted within__________________?
Show answer Hide answer
Answer: E. in any direction and in any location
A venturimeter can operate in any orientation as long as the internal flow passage remains completely full. Bernoulli principle calculations apply regardless of whether the meter is mounted horizontally or vertically. Pr...
Q2. An optimal liquid pairing for a manometer consists of fluids possessing___________________?
Show answer Hide answer
Answer: A. higher surface tension
Manometer fluids with higher surface tension minimize capillary meniscus errors in narrow tubes. Stronger surface forces help stabilize the fluid interface against minor mechanical vibrations. Proper fluid selection ensu...
Q3. Gasoline typically freezes at what temperature__________________?
Show answer Hide answer
Answer: D. less than – 30°C
Gasoline is a complex mixture of hydrocarbons with a very low freezing point, remaining liquid well below minus thirty degrees Celsius. The diverse volatile compounds composing commercial gasoline prevent the formation o...
Q4. Gamma iron is present at the following temperature___________________?
Show answer Hide answer
Answer: D. between 910°C and 1400°C
Gamma iron, also known as austenite, exists stably between nine hundred ten and fourteen hundred degrees Celsius. At these elevated temperatures, the iron crystal lattice rearranges into a face-centered cubic structure....
Q5. Fuel combustion fundamentally requires_____________________?
Show answer Hide answer
Answer: D. all the three above
Complete combustion requires a precise fuel-air ratio to ensure sufficient oxidant availability. The mixture must reach its proper ignition temperature to initiate rapid chemical oxidation reactions. Oxygen supplies the...
Q6. Due to the influence of _______________, the free surface of a liquid naturally tends to shrink into the smallest possible area.
Show answer Hide answer
Answer: A. surface tension
Surface tension creates a tensile membrane effect on liquid surfaces, causing them to shrink to the smallest possible area. Cohesive intermolecular forces pull surface molecules inward toward the bulk liquid, creating in...