Incorporating a regenerator into a gas turbine cycle__________________?
Show answer Hide answer
Answer: A. increases thermal efficiency
Explanation
A regenerator captures waste heat from high-temperature exhaust gases leaving the turbine. This recovered thermal energy preheats the compressed air before it enters the combustor. Preheating reduces the fuel mass required to reach peak cycle temperatures. Regenerative cycles use a counter-flow heat exchanger placed between compressor and turbine. Thermal efficiency improves because less external fuel heat addition is necessary. The effectiveness of the regenerator dictates the overall fuel savings achieved.
Stationary power generation gas turbines frequently employ regenerators to reduce fuel costs. Aircraft gas turbines avoid regenerators due to weight and space penalties. Waste heat recovery is a cornerstone of modern high-efficiency thermodynamic power systems. Regenerators do not alter the physical mechanical limits of the compressor ratios. Exhaust heat loss is recycled rather than eliminated entirely by the component. Altitude performance is governed by aerodynamics rather than exhaust heat regeneration.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Gas turbine rotor blading is manufactured with what rake configuration___________________?
Show answer Hide answer
Answer: B. in the direction of motion of blades
Gas turbine rotor blades are manufactured with specific rake angles for efficiency. Blades are canted in the direction of motion to match incoming gas vectors. Proper blade angling ensures smooth momentum transfer betwee...
Q2. Gas turbine cycle thermal efficiency can be enhanced by________________ ?
Show answer Hide answer
Answer: C. adding a regenerator
A regenerator is a specialized heat exchanger installed in gas turbine systems to recover waste heat. It captures thermal energy from hot exhaust gases exiting the turbine to preheat air entering the combustor. This preh...
Q3. For delivering intermittent, low-volume pneumatic flows at elevated pressures, which compressor type proves most appropriate__________________?
Show answer Hide answer
Answer: B. reciprocating
Reciprocating compressors utilize positive displacement pistons to achieve high discharge pressures at lower volumetric flow rates. Intermittent pneumatic demands match the cyclical pumping action of reciprocating compre...
Q4. During periods of maximum electrical demand, compressor regulation is best managed via___________________?
Show answer Hide answer
Answer: B. constant speed unloader
Constant speed unloaders are ideal for managing compressors during fluctuating peak electrical demands efficiently. They allow the compressor motor to run continuously while venting the excess output to atmosphere. This...
Q5. Axial flow compressors share structural similarities with____________________ ?
Show answer Hide answer
Answer: C. turbine
Axial-flow compressors and turbines utilize similar aerodynamic airfoil blade rows mounted along a central shaft. Fluid flows parallel to the axis of rotation in both machine types undergoing pressure and velocity change...
Q6. To minimize total work across multi-stage compression assuming identical polytropic indexes, what condition must be met_________________?
Show answer Hide answer
Answer: D. work done in all stages should be equal
Equal pressure ratios across every compression stage ensure that the work input is distributed evenly among all cylinders. Minimizing total work in multi-stage compression requires balancing the polytropic compression wo...