How does the compression ratio of a diesel engine compare to its expansion ratio_______________?
Show answer Hide answer
Answer: C. more
Explanation
In a diesel engine, fuel cut-off occurs after compression, meaning expansion begins after combustion. The expansion ratio is defined as total cylinder volume divided by volume at the end of combustion cut-off. Because combustion occupies part of the expansion stroke, the compression ratio is greater than expansion ratio. The ideal Diesel cycle features constant pressure heat addition followed by adiabatic expansion to bottom dead center. Compression ratio compares maximum cylinder volume to minimum clearance volume at top dead center. Comparing these volumetric ratios illustrates fundamental thermodynamic cycle differences between diesel and petrol engines.
Automotive engineers analyze diesel engine indicator diagrams to optimize fuel injection timing and efficiency. Thermal efficiency calculations for compression-ignition engines incorporate both compression and expansion ratios. Heavy-duty diesel engines operate at high compression ratios to ensure spontaneous autoignition of injected fuel. Equal compression and expansion ratios characterize the ideal Otto cycle rather than the diesel cycle. A lesser compression ratio would contradict the fundamental geometry of compression-ignition diesel engines. Variable ratios apply only to advanced variable compression engines rather than standard diesel configurations.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The Diesel Cycle is also recognized as : __________?
Show answer Hide answer
Answer: C. Constant Pressure Cycle
The ideal Diesel cycle features heat addition occurring entirely at a constant pressure phase. During this phase, fuel is injected into hot compressed air, expanding the piston at constant pressure. Option C correctly na...
Q2. Naturally aspirated diesel engines receive induction air via________________?
Show answer Hide answer
Answer: C. a vacuum chamber
Naturally aspirated engines draw air into the cylinders using the partial vacuum created inside. Downward movement of the piston increases cylinder volume and drops pressure below atmospheric levels. Atmospheric air then...
Q3. What is a standard characteristic of a typical medium-speed 4-stroke cycle diesel engine________________?
Show answer Hide answer
Answer: A. compression starts at 35° after bottom dead center and ends at top dead center
Valve timing in medium-speed four-stroke diesel engines specifies compression starting after bottom dead center. Dynamic ramming effects from incoming air inertia allow compression to begin slightly past bottom dead cent...
Q4. Idling speed in a petrol engine requires an approximate air-fuel ratio of_________________?
Show answer Hide answer
Answer: C. 10:1
Idling in a petrol engine requires a rich air-fuel ratio to maintain smooth combustion stability. Exhaust gas dilution inside the cylinder at idle demands extra fuel to ensure reliable ignition. Option C correctly identi...
Q5. Loop scavenging involves a piston crown shaped as________________?
Show answer Hide answer
Answer: B. contoured
Loop scavenging relies on a specially contoured piston crown to guide incoming and exhaust gases. The specific shape of the piston top directs fresh air upward and forces burnt gases out. Proper gas routing prevents the...
Q6. Diesel fuel injected into a cylinder auto-ignites instantly at compressed air temperatures around____________________?
Show answer Hide answer
Answer: C. 1000°C
Diesel fuel auto-ignites when injected into highly compressed air reaching temperatures around 1000 degrees Celsius. High air temperatures inside the combustion chamber provide the necessary activation energy for spontan...