How are cylindrical cams categorized based on their design configurations_________________?
Show answer Hide answer
Answer: E. none of the above
Explanation
Cylindrical cams are classified by groove geometry rather than circular or tangent profile types. Standard surface classifications like circular or tangent do not apply to cylindrical groove layouts. Therefore, none of the standard profile types listed serve as the primary categorization method. Cylindrical cams feature cam grooves machined around the outer curved surface of a rotating cylinder. Followers ride inside these curved cylindrical tracks to translate rotational motion into linear movement. Design classifications focus on lead angles, groove paths, and axial configurations instead.
Automated textile machinery and mechanical indexing devices frequently utilize cylindrical cam drives. Engineers specify groove profiles carefully to control follower acceleration and prevent jamming. Classifying cams correctly helps manufacturers select appropriate cutting tools for CNC machining. Option A describes circular profile geometries typical of plate cams rather than cylindrical drum cams. Option B refers to tangent cam profiles used primarily in automotive valve gear applications. Option C describes reciprocating motion rather than a design categorization property for cam surfaces.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. According to Kennedy’s theorem, where do the instantaneous centers of three mutually moving bodies lie___________________?
Show answer Hide answer
Answer: D. a straight line
Kennedy's theorem states that three bodies in relative motion have three instantaneous centers. Geometric analysis proves that these three distinct instantaneous centers must always be collinear. This theorem simplifies...
Q2. The efflux velocity of a water jet discharging from an orifice in a tank is proportional to_________________?
Show answer Hide answer
Answer: C. V/T
Torricelli law establishes that fluid velocity flowing from an orifice depends on the square root of the height. Symbolic mathematical representations frequently denote this square root relationship using fractional powe...
Q3. What type of kinematic pair is formed by a crosshead and its guide rails_________________?
Show answer Hide answer
Answer: E. sliding pair
A crosshead sliding along fixed parallel guide rails forms a classic sliding kinematic pair. Sliding pairs are classified as lower kinematic pairs because they feature surface contact between mating elements. This joint...
Q4. Under what motion conditions does the Coriolis component of acceleration exist________________?
Show answer Hide answer
Answer: B. rotational motion
Coriolis acceleration occurs exclusively when a point slides across a rotating reference frame. The combination of rotational velocity and linear sliding velocity generates this vector component. Without simultaneous rot...
Q5. How is the cam descent angle defined during follower motion__________________?
Show answer Hide answer
Answer: A. during which the follower returns to its initial position
The descent angle specifically covers the phase of cam rotation where the follower moves back downward. During this designated angular interval, the mechanical energy stored in the return spring forces the follower inwar...
Q6. What is the purpose of providing a crowned profile on pulleys__________________?
Show answer Hide answer
Answer: C. for automatic adjustment of belt posi-tion so that belt runs centrally
A crowned pulley profile features a slightly larger radius at its center than at its outer edges. This convex shape causes a flat belt to automatically center itself on the pulley due to lateral tracking forces. As the b...