Francis turbines are ideally applied for_____________________?
Show answer Hide answer
Answer: A. medium head application from 24 to 180 m
Explanation
Francis turbines are reaction turbines ideally suited for medium head hydroelectric installations from 24 to 180 meters. Their inward flow runner design efficiently extracts energy from moderate water pressures and flow rates. Hydraulic optimization makes Francis turbines the most widely deployed turbine type for medium head river dams. Hydraulic turbines are classified by operational head into impulse, mixed flow, and reaction categories. Francis runners feature curved blades that utilize both pressure drop and dynamic momentum change to generate power. Specific speed calculations guide engineers in selecting Francis turbines over Pelton or Kaplan alternatives.
Low head installations up to 30 meters are ideally served by axial flow Kaplan turbines rather than Francis units. High head installations exceeding 180 meters require Pelton impulse turbines to withstand extreme water jets. Claiming suitability for all heads ignores the strict hydraulic operating limits of specific turbine designs.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. An axial flow pump should be initiated with its discharge valve________________?
Show answer Hide answer
Answer: B. kept fully open
Axial flow pumps draw maximum electrical starting torque when their discharge valves are closed. Starting with the discharge valve fully open minimizes starting torque and motor overload. This operational procedure prote...
Q2. Identify the scenario involving radiation heat transfer ___________________?
Show answer Hide answer
Answer: D. heat received by a person from fireplace
Thermal radiation transmission allows heat energy to travel through space without heating intervening air molecules. Receiving heat directly from an open fireplace is a classic everyday example of radiative heat transfer...
Q3. Under fan laws, constant-wheel-diameter fans experience pressure variation as________________?
Show answer Hide answer
Answer: B. square of fan speed
Fan laws dictate that for a constant impeller wheel diameter, generated pressure varies directly as the square of speed. Doubling the rotational speed of a centrifugal fan increases the resulting pressure rise by a facto...
Q4. When starting an axial flow pump, the delivery valve position should be____________________?
Show answer Hide answer
Answer: B. open
Axial flow pump power consumption peaks sharply when the discharge delivery valve is closed. Opening the delivery valve during startup prevents excessive motor current overload conditions. This hydraulic characteristic i...
Q5. For high-flow, low-head duties like irrigation and flood control, this pump type is favored_________________?
Show answer Hide answer
Answer: B. axial flow
Axial flow pumps lift fluid parallel to the rotational pump shaft using propeller-like hydrodynamic lift blades. This blade design delivers extremely high volumetric discharge rates while operating against very low stati...
Q6. Centrifugal pump casings are contoured to minimize________________?
Show answer Hide answer
Answer: D. loss of kinetic energy
Centrifugal pump volutes and diffusers are carefully contoured to decelerate high-velocity fluid gradually. This controlled deceleration converts high kinetic energy into static pressure head before the fluid exits. Mini...