Capillary fluid phenomena are driven by_________________?
Show answer Hide answer
Answer: D. all of the above
Explanation
Capillary action is driven by surface tension forces acting along the liquid-gas interface boundary. Cohesion forces between liquid molecules pull the fluid together and maintain droplet integrity. Adhesion forces between liquid molecules and solid surface molecules draw the fluid upward against gravity. Capillarity allows liquids to flow through narrow spaces without the assistance of external pumps. Surface tension arises from the unbalanced intermolecular attractive forces at the surface of a fluid. Contact angle determines whether a liquid will rise or depress inside a narrow capillary tube.
Plant biology relies on capillary action to transport water from roots upward through xylem vessels. Ink cartridges and fountain pens use capillary channels to deliver ink smoothly to the writing tip. Geologists study capillary moisture movement within porous soil structures and underground aquifers. Option A is incomplete because adhesion and cohesion are equally fundamental to capillary rise. Option B ignores the critical adhesive forces between the liquid and the solid container walls. Option C omits the cohesive forces and surface tension properties that govern overall fluid behavior.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Bronze alloy consists of_____________________?
Show answer Hide answer
Answer: B. 90% copper and 10% tin
Bronze is a traditional metal alloy composed primarily of copper combined with tin elements. Standard metallurgical compositions for classic bronze contain approximately ninety percent copper. The remaining ten percent o...
Q2. At what specific pressure do the physical attributes of liquid water and steam converge identically_________________?
Show answer Hide answer
Answer: D. 225.6 kg/cm2
Liquid water and steam properties converge into a single phase at the thermodynamic critical pressure point. The critical pressure of water is approximately two hundred twenty-one bar, corresponding to twenty-two5.6 kilo...
Q3. Subjecting a metal to severe directional plastic deformation causes it to become_________________?
Show answer Hide answer
Answer: E. anisotropic
Severe directional plastic deformation aligns internal grain structures along specific axes. Aligned grain structures cause mechanical properties to vary depending on the direction of stress. Materials whose properties d...
Q4. Brass alloy is made up of___________________?
Show answer Hide answer
Answer: A. 70% copper and 30% zinc
Brass is a versatile metal alloy formed by combining copper with zinc alloying elements. Standard yellow brass compositions consist of approximately seventy percent copper by weight. The remaining thirty percent of the a...
Q5. Babbitt metal is classified as_________________?
Show answer Hide answer
Answer: E. A. and C. above
Babbitt metals encompass a variety of soft, low-friction alloys utilized for lining sliding bearing surfaces. These bearing alloys are traditionally formulated with either a tin base or a lead base matrix. Both tin-based...
Q6. Cast iron is generally characterized by_________________?
Show answer Hide answer
Answer: B. its elastic limit close to the ultimate breaking strength
Cast iron exhibits brittle material behavior with very limited plastic deformation capacity. Its elastic limit sits exceptionally close to its ultimate breaking strength under load. Once stress surpasses the elastic limi...