Skip to main content
Sarkari MCQs Government Exam Question Bank
Menu
Question no. 56777

An adiabatic compression process is characterized by___________________?

Select your answer for: An adiabatic compression process is characterized by___________________?
Show answer

Answer: B. no heat leaves or enters the compressor cylinder during cornpression

Explanation

Adiabatic compression prevents any thermal energy from crossing the cylinder boundary walls. The working gas increases in temperature due to mechanical work input without heat loss. Absence of heat transfer characterizes the ideal thermodynamic behavior of this compression. Compressors raise fluid pressure by performing mechanical work on the working gas medium. Rapid piston movement minimizes the time available for heat conduction through cylinder walls. Work input increases both the pressure and internal energy of the compressed gas.

Pneumatic systems utilize adiabatic compression models to estimate delivery temperatures accurately. Compressor efficiency ratings compare actual polytropic compression work against ideal adiabatic work. Overheating risks in industrial compressors stem from high temperatures generated during rapid compression. Option A describes isothermal compression, where temperature remains constant via heat rejection. Option C mentions linear temperature rise, but actual adiabatic compression follows exponential curves. Option D is incorrect because work done depends on compression paths and pressure ratios.

Subject
Engineering
Topic
—
Difficulty
medium

Related questions

Q1. A torpedo scale model is evaluated in a testing basin at 25 m/sec, while the full-scale prototype is designed to reach 5 m/sec. What scaling factor was applied to the model?

Select your answer for: A torpedo scale model is evaluated in a testing basin at 25 m/sec, while the full-scale prototype is designed to reach 5 m/sec. What scaling factor was applied to the model?
Show answer

Answer: A. 1 : 5

Similitude principles in fluid mechanics require maintaining velocity ratios between scale models and prototypes. Dividing the model test velocity of twenty-five meters per second by the prototype velocity of five yields...

Q2. Aluminium bronze consists of__________________?

Select your answer for: Aluminium bronze consists of__________________?
Show answer

Answer: C. 10% aluminium and 90% copper

Standard aluminium bronze alloys are metallurgically formulated using ninety percent copper and ten percent aluminium. This specific proportion balances high tensile strength with exceptional resistance to chemical and m...

Q3. Admiralty brass utilized for steam condenser tubing incorporates copper and zinc in what proportion_________________?

Select your answer for: Admiralty brass utilized for steam condenser tubing incorporates copper and zinc in what proportion_________________?
Show answer

Answer: B. 30 : 70

Admiralty brass typically consists of an alloy containing 70% copper, 29% zinc, and 1% tin, corresponding closest to the 70:30 copper-zinc ratio baseline.

Q4. An amorphous substance is defined as one___________________?

Select your answer for: An amorphous substance is defined as one___________________?
Show answer

Answer: B. in which there is no definite atomic structure and atoms exist in a random pattern just as in a liquid

An amorphous substance lacks any long-range periodic crystalline order in its internal atomic arrangement. Instead of forming geometric lattices, atoms and molecules are distributed in a random, disordered structural pat...

Q5. Pneumatic injection systems in internal combustion engines involve introducing___________________?

Select your answer for: Pneumatic injection systems in internal combustion engines involve introducing___________________?
Show answer

Answer: C. liquid fuel and air

Pneumatic fuel injection systems utilize compressed air blasts to atomize liquid fuel effectively. Forcing high-pressure air through injection nozzles shears liquid fuel into microscopic droplets. Introducing both atomiz...

Q6. An irregularly shaped object weighing 7.5 kg with a 0.01 m3 volume will achieve complete immersion in a fluid possessing a specific gravity of__________________?

Select your answer for: An irregularly shaped object weighing 7.5 kg with a 0.01 m3 volume will achieve complete immersion in a fluid possessing a specific gravity of__________________?
Show answer

Answer: D. 0.75

Dividing mass by volume calculates a material density of seven hundred fifty kilograms per cubic meter. Comparing this calculated object density to pure water density yields zero point seven five ratio. Specific gravity...

New!

Mock Test System is now available!

Prepare for your exam with interactive mock tests. Select your subjects, attempt 100 random MCQs against the clock, and see exactly where you stand.

Start Mock Test