A torpedo scale model is evaluated in a testing basin at 25 m/sec, while the full-scale prototype is designed to reach 5 m/sec. What scaling factor was applied to the model?
Show answer Hide answer
Answer: A. 1 : 5
Explanation
Similitude principles in fluid mechanics require maintaining velocity ratios between scale models and prototypes. Dividing the model test velocity of twenty-five meters per second by the prototype velocity of five yields five. The resulting geometric and kinematic scaling factor applied to the torpedo model equals one to five. Froude and Reynolds number scaling laws govern hydrodynamic model testing in towing testing basins. Model velocities are scaled appropriately to predict full-scale prototype performance accurately. Ratio calculations between corresponding model and prototype parameters determine scaling factors.
Naval hydrodynamicists test scaled ship and torpedo models in tow basins to evaluate drag forces. Aerospace engineers use wind tunnels with scaled aircraft models to predict flight performance characteristics. Civil engineers study scaled dam spillway models to analyze water flow patterns safely. Option B suggests one to two point five which miscalculates the velocity ratio division. Option C proposes one to twenty-five which confuses velocity ratios with squared area scaling factors. Option D implies a square root factor which is incorrect for direct velocity comparisons.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Adding silicon to aluminium produces____________________?
Show answer Hide answer
Answer: A. improvement of casting characteristics
Adding silicon to aluminium significantly improves its molten fluidity and casting characteristics. Silicon-aluminium alloys reduce shrinkage defects and enhance mold-filling capabilities during pouring. Improved castabi...
Q2. An adiabatic thermodynamic process is defined as________________?
Show answer Hide answer
Answer: B. non-heat transfer process
An adiabatic process is thermodynamically defined as occurring without any heat energy transfer. System boundaries are perfectly insulated to prevent thermal energy exchange with surroundings. Internal energy changes dur...
Q3. An engine operates at a standard rating of 960 r.p.m. with an unladen speed of 1000 r.p.m. What is the approximate speed droop characteristic of its governor___________________?
Show answer Hide answer
Answer: B. 4%
Speed droop represents the percentage decrease in engine speed from an unladen condition to full load rating. Subtracting the rated speed of nine hundred sixty from the unladen speed of one thousand gives forty r.p.m. Di...
Q4. Admiralty brass utilized for steam condenser tubing incorporates copper and zinc in what proportion_________________?
Show answer Hide answer
Answer: B. 30 : 70
Admiralty brass typically consists of an alloy containing 70% copper, 29% zinc, and 1% tin, corresponding closest to the 70:30 copper-zinc ratio baseline.
Q5. A mechanic’s hand hammer is forged from___________________?
Show answer Hide answer
Answer: D. high carbon steel
Mechanic hand hammers require high impact resistance, toughness, and wear resistance. High carbon steel contains sufficient carbon to achieve great hardness through heat treatment. Forging high carbon steel aligns grain...
Q6. An adiabatic compression process is characterized by___________________?
Show answer Hide answer
Answer: B. no heat leaves or enters the compressor cylinder during cornpression
Adiabatic compression prevents any thermal energy from crossing the cylinder boundary walls. The working gas increases in temperature due to mechanical work input without heat loss. Absence of heat transfer characterizes...