Air preheater design must primarily account for the consideration that_________________?
Show answer Hide answer
Answer: D. stack gases should not be cooled to the dew point
Explanation
Flue gases contain sulfur dioxide and water vapor that combine to form corrosive sulfuric acid at low temperatures. Cooling the exhaust gases below their acid dew point causes liquid acid to condense on metallic duct surfaces. Air preheater designs must restrict minimum gas exit temperatures to prevent catastrophic corrosion and equipment failure. Air preheaters recover waste heat from boiler exhaust gases to preheat incoming combustion air and raise efficiency. Acid dew point represents the specific temperature at which vaporized sulfuric acid begins condensing out of flue gas. Sulfur content in fossil fuels directly increases the dew point temperature and aggravates low-temperature corrosion risks.
Low approach temperatures improve thermal efficiency, but they must never risk cooling exhaust below the acid dew point. Handling and maintenance ease are important mechanical considerations but secondary to preventing destructive acid corrosion. Optimizing heat transfer area enhances performance while remaining subordinate to maintaining safe flue gas temperatures.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Which boiler type enhances furnace draught by utilizing engine exhaust steam__________________?
Show answer Hide answer
Answer: B. locomotive boiler
Locomotive boilers enhance draught by utilizing engine exhaust steam. Discharging exhaust steam through the smokebox creates a powerful partial vacuum. This mechanical design intensifies airflow through the boiler fire t...
Q2. Iso-octane is characterized by________________?
Show answer Hide answer
Answer: C. has octane number of 100
Iso-octane is the reference fuel assigned an octane rating of exactly 100. It possesses exceptional resistance to engine knock and uncontrolled auto-ignition during compression. This chemical compound serves as the upper...
Q3. Iron is classified as ____________________?
Show answer Hide answer
Answer: B. ferromagnetic
Iron possesses unpaired electrons in its atomic structure that align strongly with external magnetic fields. Ferromagnetic materials retain magnetization even after the external magnetic field is removed. The atomic dipo...
Q4. Which boiler is recommended for generating large steam volumes at low pressure?
Show answer Hide answer
Answer: C. lancashire boiler
Lancashire boilers generate large steam volumes at relatively low pressures. Their large shell capacity holds significant water volume for steady operations. Internal fire tubes provide adequate heating surface for indus...
Q5. Kerosene distillation occurs at________________?
Show answer Hide answer
Answer: C. 220 – 350°C
Kerosene is a petroleum distillate fraction that vaporizes within a specific boiling range. This fractional distillation process occurs between the temperature limits of 220°C and 350°C. Heated crude oil components separ...
Q6. Isothermal compression efficiency, even at high speeds, is approached through A. multi-stage compression B. cold water spray C. both A. and B. above D. fully insulating the cylinder E. high stroke_________________?
Show answer Hide answer
Answer: C. both A. and B. above
Multi-stage compression with intercooling removes heat between stages to keep temperatures low. Cold water sprays injected into the cylinder absorb heat directly during the compression process. Both methods limit tempera...