A turnbuckle mechanism incorporates____________________?
Show answer Hide answer
Answer: C. left hand threads on one end and right hand threads on other end
Explanation
A turnbuckle is a mechanical device used to adjust tension or length in tie rods and cables easily. It features a central frame body with internal threaded ends matching two opposing tension rods. One end features standard right-hand threads while the opposing end incorporates left-hand threads. Thread direction determines whether components tighten or loosen when rotated clockwise or counterclockwise. Combining left-hand and right-hand threads on a single shaft allows simultaneous drawing together or pushing apart. Rotating the turnbuckle body pulls both attached rods inward or pushes them outward without twisting the cables.
Having right-hand threads on both ends would cause one rod to screw in while the other unscrews simultaneously. Having left-hand threads on both ends prevents the simultaneous drawing action required to adjust overall length. Having no threads or central thread placement prevents the differential adjustment motion required by turnbuckles.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. When examining a heavy close-coiled helical spring, the shear stress experienced at the inner wire face compared to the outer face is_________________?
Show answer Hide answer
Answer: A. larger
Close coiled helical springs experience higher torsional shear stress at the inner wire face. Direct shear stress combines with curvature effects to concentrate stresses on the inside diameter. The inner radius of the sp...
Q2. The energy absorption capacity of a bolt subjected to shock can be improved by___________________?
Show answer Hide answer
Answer: E. making shank diameter equal to core diameter of thread
Reducing the shank diameter of a bolt to match the thread root diameter increases its compliance and energy absorption capacity. A slender shank distributes impact energy more uniformly along the entire fastener length r...
Q3. Set screws are primarily categorized as_________________?
Show answer Hide answer
Answer: C. used to prevent relative motion be-tween parts
Set screws are specialized threaded fasteners primarily used to prevent relative motion. They screw through a threaded hub to press firmly against a shaft, locking components together. This prevents gears, pulleys, and c...
Q4. Compressing a tightly wound helical compression spring places its wire under________________?
Show answer Hide answer
Answer: B. shear
Compressing a helical spring twists the wire, subjecting the wire cross-section predominantly to torsional shear stresses.
Q5. Do wire rope constructions always require a central core________________?
Show answer Hide answer
Answer: A. yes
Standard wire rope designs incorporate a central core to support the surrounding outer strands. The core maintains the geometric shape of the rope under heavy tensile loading conditions. Without a central core, individua...
Q6. When three varying masses are dropped from identical heights inside a vacuum chamber, their fall times will be______________?
Show answer Hide answer
Answer: A. same time to reach earth
In a vacuum chamber where air resistance is absent, all falling objects accelerate equally due to gravity. Galileo demonstrated that gravitational acceleration is independent of mass, causing all bodies to fall at the ex...