Within the virtual work formula, the subsequent force is disregarded_______________________?
Show answer Hide answer
Answer: D. all of the above
Explanation
Smooth contact reactions, pure rolling points, and fixed pivot axes do no work during virtual displacements. The principle of virtual work allows engineers to disregard these specific reactive forces in calculations. Since their displacement component is zero, these reactions drop out of the virtual work equation entirely. The principle of virtual work states that total virtual work done by all forces in equilibrium is zero. Virtual displacement is an imaginary infinitesimal movement consistent with the geometric constraints of the system. Constraint forces perpendicular to allowed motion perform no mechanical work during virtual displacements.
Selecting only smooth surface reactions ignores rolling contacts and fixed pivot axes which also do zero work. Restricting the rule to rolling points overlooks fixed hinge pins and smooth surfaces in the mechanism. Stating none of the above is incorrect because all listed reactions are legitimately disregarded in virtual work.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Letting n = number of structural members and j = number of joints, a statically determinate (perfect) frame satisfies the relation n =_________________?
Show answer Hide answer
Answer: C. 2/-3
For a pin-jointed plane frame, the condition for static determinacy relating members n and joints j is given by n = two j minus three. This fundamental equation ensures that the number of internal member force unknowns e...
Q2. Forces are classified as concurrent when their respective lines of action intersect at________________?
Show answer Hide answer
Answer: A. one point
Forces whose lines of action intersect at a common point are classified as concurrent forces. Concurrent force systems can be simplified into a single resultant force acting through that intersection point. Because they...
Q3. Within real-world mechanical machines_______________?
Show answer Hide answer
Answer: C. mechanical advantage is less than velocity ratio
Due to friction and energy losses the mechanical advantage of any real-world machine is always less than its velocity ratio. Mechanical advantage measures the force amplification provided by the machine during operation....
Q4. The smallest force needed to pull a body up an inclined plane equals W sin (plane inclination + friction angle) directed along___________________?
Show answer Hide answer
Answer: D. at an angle equal to the angle of friction to the inclined plane
The minimum force required to pull a body up an inclined plane acts at an angle equal to the angle of friction relative to the plane face. Resolving forces parallel and perpendicular to the inclined plane proves that thi...
Q5. When finding frame stresses via the method of sections, an imaginary cut divides the structure into two segments such that it intersects no more than____________________?
Show answer Hide answer
Answer: B. three members with unknown forces of the frame
When applying the method of sections to solve frame member forces, the imaginary cut should pass through no more than three members. Statics equations for two-dimensional planar structures limit unknown internal forces t...
Q6. Should rain fall against the movement direction of a pedestrian, he must position his umbrella___________________?
Show answer Hide answer
Answer: D. less inclined when standing
When standing still a pedestrian tilts their umbrella further into the rain but when walking forward vector relative velocity applies. Walking forward combines the downward velocity of raindrops with the forward velocity...