When scavenge air is delivered to a two-stroke engine at a higher density than the surrounding air, the engine is classified as__________________?
Show answer Hide answer
Answer: B. Not supercharged
Explanation
Scavenge air delivered at a higher density than surrounding ambient air through a compressor means the engine is supercharged.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. A metal specimen weighs 219 gms in air, 180 gms in water, and 120 gms in a liquid of unknown density. Which conclusion regarding the metal's density is correct__________________?
Show answer Hide answer
Answer: A. density of metal can’t be determined
Without knowing the exact volume or mass of the metal independently of the unknown liquid's density, the absolute density of the metal cannot be determined. Archimedes principle provides relative buoyant forces, but insu...
Q2. What is a riveted joint termed if the count of rivets diminishes progressively from the innermost row to the outer boundary__________________?
Show answer Hide answer
Answer: B. diamond riveted joint
A diamond riveted joint features a tapered layout where the number of fasteners decreases toward the plate edges. This progressive reduction in rivet count matches the diminishing load carried by the outer sections of th...
Q3. How is the efficiency of a riveted joint defined as the proportion of its load capacity compared to an unpunched plate_________________?
Show answer Hide answer
Answer: A. tension
Riveted joint efficiency is primarily evaluated based on its tensile strength capacity compared to an unpunched solid plate. Drilling holes to accommodate rivets removes cross-sectional material, inherently weakening the...
Q4. Coulomb friction describes the frictional resistance acting between_____________________?
Show answer Hide answer
Answer: A. bodies having relative motion
Coulomb friction describes the frictional resistance encountered between solid bodies having relative motion. This classical friction model assumes that the frictional force is proportional to the normal force pressing t...
Q5. What does flow stress correspond to in metal deformation processes___________________?
Show answer Hide answer
Answer: C. plastic deformation of solids
Flow stress corresponds to the instantaneous resistance of a solid material to plastic deformation. It represents the stress level required to continue plastic yielding as the metal work hardens. During forming processes...
Q6. If rain falls against the direction of walking, how must a pedestrian tilt their umbrella ________________________?
Show answer Hide answer
Answer: D. less inclined when standing
Walking into rain causes the relative velocity vector of the raindrops to tilt forward relative to a stationary observer. Standing still means the rain falls more vertically, requiring a different tilt angle for complete...