What is the typical metallic composition of silver solder ___________________?
Show answer Hide answer
Answer: A. silver, copper, zinc
Explanation
Silver solder is a brazing alloy primarily composed of silver, copper, and zinc to lower melting points and improve joint strength. Adding copper and zinc to silver creates a ternary alloy system with a significantly lower liquidus temperature than pure silver. This metallic combination ensures excellent capillary flow and strong metallurgical bonding during high-temperature brazing operations. Brazing uses filler metals with melting temperatures above 450 degrees Celsius to join base metals without melting them. Silver-based brazing alloys provide superior corrosion resistance, high electrical conductivity, and exceptional joint ductility. Varying the proportions of silver, copper, and zinc tailors the melting range and mechanical strength for specific applications.
Silver, tin, and nickel alloys are typically used for specialized electrical contacts or high-temperature soldering rather than standard brazing. Silver, lead, and zinc combinations lack the mechanical strength and corrosion resistance required for high-performance brazed joints. Silver, copper, and aluminium compositions form brittle intermetallic compounds that degrade joint integrity during brazing.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. How does barometric atmospheric pressure vary with increasing elevation__________________?
Show answer Hide answer
Answer: B. first slowly and then steeply
Barometric atmospheric pressure decreases with altitude due to the reducing weight of the overlying air column. Lower atmospheric layers are dense, causing pressure to drop slowly at first near sea level. Higher altitude...
Q2. What parameters dictate how coal will behave inside a combustion furnace_______________________?
Show answer Hide answer
Answer: C. the proximate analysis
Proximate analysis measures moisture, volatile matter, fixed carbon, and ash, defining how coal ignites and burns. Combustion efficiency and flame stability depend directly on the volatile matter and fixed carbon proport...
Q3. What variables are plotted on true stress-strain diagrams for engineering materials__________________?
Show answer Hide answer
Answer: B. load/instantaneous cross-sectional area original area and log
True stress-strain diagrams plot true stress based on instantaneous cross-sectional area against natural logarithmic strain increments. Using instantaneous area accounts for the continuous reduction in specimen cross-sec...
Q4. What is the change in internal energy equal to in reciprocating steam engines__________________?
Show answer Hide answer
Answer: A. work done during the rankine cycle ;
Reciprocating steam engines convert thermal energy into mechanical work through idealized thermodynamic cycles. In standard Rankine cycle analysis, energy balances equate the net work output to changes in cycle states. I...
Q5. What characterizes the sublimation region on a phase diagram__________________?
Show answer Hide answer
Answer: A. solid and vapour phases are in equi-librium
The sublimation region on a thermodynamic phase diagram defines the equilibrium boundary where solid and vapor phases coexist. Along this specific boundary line, molecules transition directly between solid and gas states...
Q6. Typically, how much coal is consumed per kWh generated in a standard thermal power plant__________________?
Show answer Hide answer
Answer: C. 0.6 to 0.8 kg
Standard coal-fired thermal power plants typically consume around zero point six to zero point eight kilograms of coal per kilowatt-hour. Thermodynamic losses in boilers, steam turbines, and electrical generators dictate...