What is the standard spark plug electrode gap normally set to________________?
Show answer Hide answer
Answer: C. 0.45 to 0.6 mm
Explanation
The standard spark plug gap for traditional automotive ignition systems is typically set between 0.45 and 0.6 millimeters. This precise gap distance ensures a reliable electric spark forms under high combustion chamber compression pressures. Setting the electrodes within this specific range prevents misfires while avoiding excessive electrical voltage demands. Spark plugs ignite the air fuel mixture inside internal combustion engines using high voltage electrical discharges. Gap dimensions directly influence spark kernel formation, flame propagation speed, and overall engine combustion efficiency. Over thousands of miles of operation, spark plug electrodes gradually erode, causing the gap to widen.
Gaps between 0.1 and 0.2 millimeters are too narrow to allow proper flame kernel development in engines. Values from 0.2 to 0.4 millimeters represent older small engine specifications rather than standard automotive ranges. Larger gaps approaching 1 millimeter typically require modern high energy electronic ignition coils to fire correctly.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. How does the acoustic velocity in an ideal gas vary relative to its thermodynamic state__________________?
Show answer Hide answer
Answer: E. absolute temperature
The acoustic velocity in an ideal gas is directly proportional to the square root of temperature. Thermodynamic absolute temperature determines the average translational kinetic energy of gas molecules directly. Faster m...
Q2. How does steam temperature respond to an increasing load in boilers equipped with radiation superheaters________________?
Show answer Hide answer
Answer: B. decreases
Radiation superheaters experience a decrease in steam temperature as the boiler load increases. Fuel firing rate increases less proportionally than steam flow at higher loads, reducing radiant heat absorption per unit ma...
Q3. How does the specific volume of steam vary as pressure rises_____________________?
Show answer Hide answer
Answer: C. rapidly first and then slowly
At low saturation pressures, steam expands enormously, causing very rapid changes in specific volume. At higher pressures, the vapor molecules are densely packed, making volume changes much smaller. This non-linear relat...
Q4. What physical property causes a liquid free surface to minimize its area and contract_____________?
Show answer Hide answer
Answer: D. surface tension
Surface tension is the cohesive property that causes liquid surfaces to behave like stretched membranes. Cohesive forces among internal molecules pull surface molecules inward, minimizing the total exposed surface area....
Q5. A tank's air space above oil (specific gravity 0.8) has a pressure of 0.1 kg/cm”. What is the fluid pressure at a depth of 2.5 m below the oil surface __________________?
Show answer Hide answer
Answer: B. 3 metres of water column
Fluid pressure equals head multiplied by specific gravity combined with overlying gas pressure heads. An oil depth of 2.5 meters with specific gravity zero point eight equals two meters of water column pressure. Adding t...
Q6. What is the recommended temperature range for flue gases leaving the air heater outlet__________________?
Show answer Hide answer
Answer: B. above dew-point temperature of flue gases
Flue gases contain sulfur and water vapor that form corrosive acids below specific temperatures. Maintaining temperatures above the dew point prevents liquid acid from condensing on metal. Condensation of sulfuric acid r...