What is the approximate load-handling capacity of a belt conveyor___________?
Show answer Hide answer
Answer: B. 50 to 100 tonnes/hr
Explanation
Standard belt conveyors used in material handling typically have high mass flow capacities. Continuous movement of bulk materials allows rapid transfer across processing plants. Therefore, standard belt conveyors handle approximately fifty to one hundred tonnes per hour. Conveyor capacity depends on belt speed, width, and the density of the transported coal. Heavy duty idler rollers support the weight of the moving coal along the path. Drive motors supply continuous torque to keep the heavy loaded belt moving smoothly.
Thermal power plants consume vast amounts of coal requiring high capacity conveyors. Material handling systems must match the burn rate of the massive boiler furnaces. Reliable conveyor capacity prevents bottlenecks in the fuel supply chain operations. Twenty to forty tonnes per hour is typical for smaller or narrower auxiliary conveyors. One hundred to one hundred fifty tonnes per hour represents heavy industrial ratings. One hundred fifty to two hundred tonnes per hour requires specialized wide high speed belts.
- Subject
- Engineering
- Category
- Electrical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. What is the function of an Edward's air pump____________?
Show answer Hide answer
Answer: D. removes air alongwith vapour and also the condensed water from condenser
An Edward's air pump is designed for marine and stationary steam condenser systems. Its unique plunger design handles air, vapor, and liquid condensate without losing prime. Therefore, it removes air along with vapor and...
Q2. How is the work output produced by a turbine calculated in a Rankine cycle__________?
Show answer Hide answer
Answer: B. change of enthaply between inlet and outlet
The specific work output produced by a turbine in an adiabatic Rankine cycle equals the decrease in enthalpy between inlet and outlet. Applying the steady flow energy equation to an adiabatic turbine shows that work is d...
Q3. How do jet-type condensers operate___________?
Show answer Hide answer
Answer: C. steam and cooling water mix
In jet type condensers, exhaust steam and cooling water mix directly together. Direct contact between the fluids provides rapid and efficient steam condensation. Therefore, steam and cooling water mix within a jet type c...
Q4. What contaminants do magnetic separators extract in coal preparation facilities___________?
Show answer Hide answer
Answer: C. iron particles
Magnetic separators are specifically designed to remove tramp iron and ferrous metal particles. These unwanted metal pieces enter raw coal supplies during mining and transport. Therefore, magnetic separators extract iron...
Q5. How does the reheat factor behave across steam turbines_____________?
Show answer Hide answer
Answer: A. increases with the increase in number of stages
The reheat factor increases as the number of turbine stages increases due to the cumulative effect of stage inefficiencies reheating steam. Internal friction losses within each stage increase the enthalpy of the exhaust...
Q6. What is the term for the graphical plot illustrating water discharge versus time in hydroelectric plants___________?
Show answer Hide answer
Answer: D. hydro graph
A hydro graph is the graphical representation of water discharge or flow rate. Plotting water volume against time illustrates river flow characteristics for power plants. Therefore, the graphical plot of water discharge...