Two identical-material balls with a 2:1 diameter ratio are heated equally and cooled via radiation; the cooling rate of the larger ball relative to the smaller is____________________?
Show answer Hide answer
Answer: C. 1 : 2
Explanation
Cooling rate via radiation is determined by the ratio of emitting surface area to total mass. For spherical balls of identical material, surface area scales with diameter squared while mass scales cubed. A two-to-one diameter ratio results in a surface-to-mass ratio change yielding a cooling rate of one to two. Stefan-Boltzmann law governs radiant heat loss based on surface area, emissivity, and absolute temperature values. Sphere surface area equals four pi times radius squared, while volume equals four thirds pi radius cubed. Transient cooling calculations require equating rate of internal energy change to surface radiative heat loss.
A one-to-one cooling rate ignores the geometric scaling differences between surface area and internal mass. A two-to-one ratio incorrectly assumes cooling speed increases linearly with diameter without mass scaling. Higher ratios like four to one miscalculate the volumetric mass scaling factor inherent in spherical bodies.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. As temperature drops, the thermal conductivity of non-metallic amorphous solids__________________?
Show answer Hide answer
Answer: B. decreases
In non-metallic amorphous solids (like glass or amorphous polymers), thermal conductivity generally decreases with decreasing temperature.
Q2. Conductive heat transfer through a solid medium depends on_______________?
Show answer Hide answer
Answer: E. all of the above
Fourier's law establishes that conductive heat transfer is proportional to surface area and temperature gradient. It is also inversely proportional to the material thickness separating the two opposing thermal faces. Mat...
Q3. The Stefan-Boltzmann constant has units of ____________________?
Show answer Hide answer
Answer: D. watt/cm2 °K4
The Stefan-Boltzmann constant has SI units of watts per square meter per kelvin to the fourth power. Dimensional analysis of the radiation law yields watt per square centimeter kelvin to the fourth power. Mathematical sc...
Q4. Water's thermal conductivity generally varies with rising temperature by____________________?
Show answer Hide answer
Answer: D. may increase or decrease depending on temperature
Water exhibits anomalous thermal conductivity behavior that changes direction as temperature increases. Conductivity rises gradually up to approximately 130 degrees Celsius before starting to decline. Option D is correct...
Q5. Wood thermal conductivity is governed by_______________?
Show answer Hide answer
Answer: D. all of the above
The thermal conductivity of wood is significantly influenced by its moisture content, overall density, and grain temperature. Wet wood conducts heat much faster than dry wood because water has a higher thermal conductivi...
Q6. Solid metal thermal conductivity typically responds to rising temperature by___________________?
Show answer Hide answer
Answer: B. decreases
In solid pure metals, increased lattice vibrations at higher temperatures cause severe electron scattering. Enhanced thermal agitation disrupts the smooth movement of free conduction electrons through the crystal lattice...