The overall heat transfer coefficient concept applies to heat transfer processes involving________________?
Show answer Hide answer
Answer: D. conduction and convection
Explanation
The overall heat transfer coefficient combines solid wall conduction and fluid boundary convection resistances. Composite systems involve heat flowing through solid partitions bounded by moving fluids on either side. Calculating total thermal resistance requires summing individual convective and conductive resistance components in series. Electrical resistance analogy simplifies complex thermal circuits involving multiple material layers and fluid films. Thermal radiation is sometimes linearized and included alongside convection in overall heat transfer coefficients. Reciprocal of the overall coefficient represents total thermal resistance per unit surface area of the system.
Building wall assemblies require overall heat transfer calculations to determine mandatory structural insulation ratings. Shell and tube heat exchanger performance depends heavily on the combined fluid-to-fluid overall coefficient. Industrial boiler tube sizing incorporates fouling factors into overall heat transfer coefficient calculations. Conduction alone only applies to solid media without accounting for fluid boundary layer resistance effects. Convection alone neglects the solid barrier separating the two distinct fluid thermal environments. Radiation is typically treated as a parallel mechanism rather than the primary focus of standard overall coefficients.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Water's thermal conductivity generally varies with rising temperature by____________________?
Show answer Hide answer
Answer: D. may increase or decrease depending on temperature
Water exhibits anomalous thermal conductivity behavior that changes direction as temperature increases. Conductivity rises gradually up to approximately 130 degrees Celsius before starting to decline. Option D is correct...
Q2. Wood thermal conductivity is governed by_______________?
Show answer Hide answer
Answer: D. all of the above
The thermal conductivity of wood is significantly influenced by its moisture content, overall density, and grain temperature. Wet wood conducts heat much faster than dry wood because water has a higher thermal conductivi...
Q3. Solid metal thermal conductivity typically responds to rising temperature by___________________?
Show answer Hide answer
Answer: B. decreases
In solid pure metals, increased lattice vibrations at higher temperatures cause severe electron scattering. Enhanced thermal agitation disrupts the smooth movement of free conduction electrons through the crystal lattice...
Q4. A material's thermal conductivity can be described as its ability to________________?
Show answer Hide answer
Answer: D. all of the above
Thermal conductivity governs how rapidly heat passes through a material under a temperature gradient. Fourier law links heat flow rate directly to cross-sectional area, thickness, and temperature difference. Option D is...
Q5. Log mean temperature difference for counter-flow versus parallel-flow arrangements is________________?
Show answer Hide answer
Answer: B. more
Counter-flow heat exchangers maintain a more uniform temperature difference along their entire length than parallel-flow layouts. This balanced thermal gradient results in a higher log mean temperature difference for ide...
Q6. The proportion of radiant energy absorbed by a surface relative to total incident radiation is termed_________________?
Show answer Hide answer
Answer: A. absorptive power
Absorptive power represents the specific fraction of incident radiant energy absorbed by a surface. This fundamental property quantifies how effectively an object captures incoming electromagnetic radiation waves. Total...