The nuclear power station located in Tarapur operates which specific reactor design________________?
Show answer Hide answer
Answer: C. boiling water
Explanation
The Tarapur Atomic Power Station famously utilizes boiling water reactor designs for its initial units. These boiling water reactor units generate steam directly within the reactor pressure vessel to drive turbine generators. Tarapur represents one of the pioneering nuclear power installations built in South Asia to supply commercial electrical grid power. Tarapur Atomic Power Station is located in Maharashtra, India, and has operated successfully for several decades. Boiling water reactors at Tarapur use enriched uranium dioxide fuel clad in zirconium alloy tubes for reliable power output. Nuclear power stations require coastal locations with access to massive quantities of condenser cooling water for steam cycles.
Option A is incorrect because Tarapur initial units were not constructed as fast breeder reactor experimental systems. Option B is wrong because pressurized water reactors were not chosen for the specific Boiling Water Reactor design at Tarapur. Option D and E are incorrect because Tarapur units specifically operate standard commercial boiling water reactor configurations.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. From both economic and nuclear perspectives, the most viable fuel choice for a thermonuclear fusion reactor is____________________?
Show answer Hide answer
Answer: C. deuterium
Deuterium offers a highly favorable fusion cross-section and is abundantly available in natural ocean water resources. Its widespread oceanic abundance makes deuterium economically viable for fueling future commercial fu...
Q2. During the phenomenon of nuclear fission___________________?
Show answer Hide answer
Answer: A. the original elements change into completely different elements
During nuclear fission a heavy atomic nucleus splits into smaller daughter fragments. This splitting process transforms the original heavy element into completely different chemical elements. Mass defect during this tran...
Q3. The physical process wherein a heavy atomic nucleus splits apart into two lighter fragments is designated as_________________?
Show answer Hide answer
Answer: B. fission
Nuclear fission describes the physical process where a heavy atomic nucleus splits into lighter fragments. This splitting event is triggered when a heavy nucleus absorbs an incoming neutron and becomes unstable. The resu...
Q4. The standard international unit for quantifying radioactivity is_____________?
Show answer Hide answer
Answer: C. curie
The curie is a historical unit established to quantify the rate of radioactive material decay. It is defined precisely as thirty-seven billion nuclear disintegrations occurring per second. This standard unit provides a c...
Q5. The total energy liberated during the fission of a uranium nucleus amounts to__________________?
Show answer Hide answer
Answer: C. 199 MeV
The fission of a single uranium-235 nucleus releases approximately two hundred million electron volts of total energy. Detailed nuclear physics measurements place this exact energy release value very close to one hundred...
Q6. How does the energy output of a thermal reactor compare to a breeder reactor of equivalent physical dimensions__________________?
Show answer Hide answer
Answer: D. much less
Breeder reactors achieve significantly higher power densities and fuel utilization efficiencies. Thermal reactors burn only a fraction of their fuel before requiring refueling shutdowns. Consequently a breeder reactor pr...