The internal energy of a gas governed by the Van-der-Waals equation [p + (a/v2)](V – b) = RT depends upon___________________?
Show answer Hide answer
Answer: A. Pressure & temperature
Explanation
According to thermodynamic relations for real gases described by the Van der Waals equation, internal energy is a function of both temperature and specific volume.
- Subject
- Engineering
- Category
- Chemical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Large-scale fires on fuel gas distribution lines are usually extinguished by________________?
Show answer Hide answer
Answer: D. Nitrogen
Nitrogen gas is an inert medium used to displace oxygen and smother fires. It reduces local oxygen concentrations below the combustion threshold safely. Nitrogen does not support combustion, making it ideal for gaseous f...
Q2. Water pipes featuring large lengths and diameters are fabricated via____________________?
Show answer Hide answer
Answer: C. Semi-centrifugal casting
Semi-centrifugal casting uses rotational centrifugal force combined with gravity. This method is specifically designed to manufacture symmetrical, long hollow pipes. Mold rotation packs the molten metal outward to form u...
Q3. Raising the carbon content in steel results in_________________?
Show answer Hide answer
Answer: B. Increasing the ductility transition temperature
Increasing carbon content in steel raises the ductile-to-brittle transition temperature. Higher carbon fractions promote harder microstructures that fracture at higher temperatures. Impact toughness decreases significant...
Q4. Lead is alloyed into 60:40 brass primarily to enhance its_________________?
Show answer Hide answer
Answer: A. Machinability
Lead is added as a small alloying element to 60:40 brass to improve machinability. Insoluble lead particles act as chip breakers during high-speed cutting operations. This addition reduces tool wear and produces smooth m...
Q5. A high-quality rimming steel typically exhibits_________________________?
Show answer Hide answer
Answer: A. Carbon and silicon should be low
Rimming steel requires very low carbon and silicon contents in the melt. Low carbon and silicon allow controlled gas evolution during ingot solidification. This gas evolution forms a clean, bubble-free outer rim of high...
Q6. Lead is poured into the joint spaces between two _______________ pipes?
Show answer Hide answer
Answer: C. Cast iron
Molten lead is poured into joint spaces to seal cast iron pipe connections. The poured lead creates a strong, durable, and watertight spigot-and-socket seal. Caulking the lead ensures the joint withstands internal water...