Sintered carbide cutting inserts are generally unsuited for machining_______________?
Show answer Hide answer
Answer: D. steel
Explanation
Sintered carbide cutting inserts can chemically react with steel at high cutting temperatures. Iron diffusion into carbide tools accelerates crater wear during high-speed steel machining. Alternative tool materials like coated carbides or ceramics are preferred for machining steel. Cutting tool inserts require thermal stability and chemical inertness during metal removal. Carbide tools consist of hard carbide particles bonded with cobalt matrices. High temperatures at the tool-chip interface cause accelerated chemical breakdown in steel.
Machining workshops select specific cutting tool inserts based on workpiece material types. Tool wear optimization prevents premature failure during high-volume steel production runs. CNC machining operations rely on compatible tool and workpiece material pairings. Option A is incorrect because sintered carbides machine brass effectively without reaction. Option B is incorrect because cast iron is routinely and successfully machined with carbides. Option C is incorrect because carbides work well for many aluminium machining tasks.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. An unsealed water container undergoes upward acceleration along an inclined plane. The free liquid surface will tilt in what manner__________________?
Show answer Hide answer
Answer: C. make an angle in opposite direction to inclination of inclined plane
An unsealed container accelerating upward along an inclined plane experiences combined gravitational and inertial forces. The resultant acceleration vector acts at an angle relative to the vertical plane of the container...
Q2. The specific calorific energy of mineral coal falls within the range of_______________________?
Show answer Hide answer
Answer: C. 2000-4000 kcal/kg
The specific calorific value of mineral coal typically falls within the range of 5000 to 8000 kcal/kg, making option C incorrect.
Q3. Hydraulic cavitation phenomena are triggered by_____________________?
Show answer Hide answer
Answer: D. low pressure
Hydraulic cavitation occurs when localized fluid velocities increase sharply within a piping system. According to Bernoulli's principle, high fluid velocity corresponds to a drop in static pressure. When local static pre...
Q4. Chilled cast iron exhibits____________________?
Show answer Hide answer
Answer: A. no graphite
Chilled cast iron is cast using metal molds that extract heat rapidly from the molten surface. Rapid cooling prevents carbon from precipitating as graphite flakes within the chilled surface zones. Instead, carbon combine...
Q5. As temperatures approach absolute minimums, freezing and boiling points converge at what unique temperature____________________?
Show answer Hide answer
Answer: B. 273.16°K
Thermodynamic temperature scales define absolute zero as zero kelvin where molecular motion reaches a minimum. The triple point of water is defined precisely at two hundred seventy-three point sixteen kelvin by conventio...
Q6. Carbon residue content within diesel fuel oils should not exceed___________________?
Show answer Hide answer
Answer: E. 0.001%
High-speed diesel engines require clean fuel oils to prevent carbon buildup on combustion chamber walls. Carbon residue testing measures the tendency of fuel oils to form carbonaceous deposits when heated. Strict quality...