Reaction turbines find application in____________________?
Show answer Hide answer
Answer: E. low head and high discharge
Explanation
Reaction turbines are specifically engineered to operate efficiently under conditions of low head and high discharge. The runner blades are fully submerged in water, utilizing both pressure drop and kinetic energy transfer. Large volumetric water flows compensate for the lower available potential head to generate substantial power. Francis and Kaplan turbines represent classic reaction turbine designs widely deployed in modern hydro plants. Specific speed ratings categorize reaction turbines as high-speed runners suitable for large volume flows. Runner blade angles adjust dynamically in Kaplan turbines to maintain high efficiency across varying flows.
Run-of-the-river hydroelectric dams across large rivers utilize Kaplan reaction turbines for low-head generation. Low-head tidal barrage power schemes rely extensively on high-discharge reaction turbine generating units. Municipal water treatment plants sometimes recover energy using small reaction turbines in low-head channels. High head applications require impulse turbines like Pelton wheels rather than submerged reaction runners. High head and low discharge duties match the operational profile of multi-jet impulse turbine installations. Combinations involving high head are unsuitable for reaction turbines due to excessive cavitation risks.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. A low specific speed turbine implies that it is__________________?
Show answer Hide answer
Answer: C. impulse turbine
Low specific speed turbines are designed to handle high water heads with relatively small flow rates. Impulse turbines such as Pelton wheels operate efficiently under these exact high head conditions. Option C correctly...
Q2. Industrial applications have largely abandoned reciprocating pumps in favor of centrifugal pumps due to____________________?
Show answer Hide answer
Answer: A. high initial and maintenance cost
Industrial plants have largely abandoned reciprocating pumps due to their high initial capital and ongoing maintenance costs. Complex moving parts, valves, and seals in reciprocating pumps require frequent servicing comp...
Q3. Pressure intensifiers multiply fluid pressure proportionally to____________________?
Show answer Hide answer
Answer: B. square of ratio of diameters
Pressure intensifiers multiply fluid pressure in direct proportion to the square of their diameter ratios. Pascal law dictates that force equals pressure multiplied by area, creating area ratio advantages. Because area s...
Q4. How does air thermal conductivity vary with rising temperature__________________?
Show answer Hide answer
Answer: A. increases
The thermal conductivity of gases like air increases as their absolute temperature rises. Higher temperatures increase molecular kinetic energy and velocity, enhancing thermal diffusion rates. Option A correctly indicate...
Q5. Identify the incorrect statement regarding centrifugal pumps_______________?
Show answer Hide answer
Answer: A. discharge a diameter
Stating that discharge is directly proportional to impeller diameter is dimensionally incorrect in centrifugal pump laws. Volumetric discharge actually scales with the cube of the impeller diameter under constant speed s...
Q6. Draft tube taper angles are specified as A. greater than 15° B. greater than 8° C. greater than 5° D. less than 8° E. less than 3°.___________________?
Show answer Hide answer
Answer: D. less than 8°
Draft tube taper angles are kept less than 8 degrees to prevent flow separation and boundary layer detachment. Gradual expansion ensures smooth deceleration of water leaving the turbine runner without turbulence losses....