Operating air-fuel ratios in gas turbine plants typically range on the order of______________________?
Show answer Hide answer
Answer: E. 50: 1
Explanation
Gas turbine plants operate on very lean mixtures with high excess air proportions. Air-fuel ratios typically range around fifty to one or higher in operational turbines. High air proportions dilute combustion products to safe temperatures for turbine blades. Gas turbine combustors mix compressed air with fuel sprays for continuous combustion. Primary combustion zones operate near stoichiometric limits for stable flame holding. Secondary and tertiary dilution air cools the gas stream before entering turbine sections.
Power generation gas turbines utilize high air-fuel ratios to extend turbine component life. Environmental regulations benefit from lean mixtures that lower harmful emissions output. Combustor design balances flame stability requirements with effective dilution cooling airflow. Option A suggests seven to one, which represents an extremely rich mixture causing smoke. Option B proposes fifteen to one, typical of stoichiometric automotive internal combustion engines. Option C and D suggest lower ratios that fail to provide adequate turbine cooling air.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. What primary benefits does multi-stage compression offer over single-stage designs________________?
Show answer Hide answer
Answer: E. all of the above
Multi-stage compression divides overall pressure ratio steps across multiple cylinders with intercoolers between them. Intercooling approaches isothermal compression, which significantly lowers the specific power consump...
Q2. How does compressor operational performance at high altitudes compare against sea-level baselines_______________?
Show answer Hide answer
Answer: C. lower
Atmospheric air density decreases significantly at high altitudes due to lower barometric pressure and ambient temperature. Lower air density reduces the mass flow rate entering the compressor per unit of swept volume or...
Q3. Peak operational temperatures in gas turbine systems typically fall within what range in COMPRESSORS, GAS TURBINES AND JET ENGINES______________________?
Show answer Hide answer
Answer: E. 700°C
The value of 700 degrees Celsius reflects baseline material capabilities in traditional engineering systems. Turbine entry temperatures often push far beyond this, but 700 degrees Celsius serves as a classic limit. Tradi...
Q4. Identify the incorrect assertion from the list ?
Show answer Hide answer
Answer: D. axial flow compressors are bigger in diameter compared to centrifugal type
Axial flow compressors have smaller diameters compared to centrifugal compressors of equivalent flow capacity. The radial design of centrifugal compressors inherently requires a much larger overall outer casing diameter....
Q5. Operational pressure ratios in standard gas turbines typically fall within the order of____________________?
Show answer Hide answer
Answer: C. 8 : 1
Standard industrial gas turbines operate effectively within overall pressure ratios typically ranging from 8 to 1 to 12 to 1. Operating at an 8 to 1 pressure ratio balances thermal efficiency gains against material tempe...
Q6. What typical propulsive efficiency values are achieved during practical operation _______________?
Show answer Hide answer
Answer: C. 60%
Practical aircraft engines achieve propulsive efficiencies around sixty percent during standard cruising operations. Losses in both the intake and exhaust streams prevent ideal propulsion systems from reaching hundred pe...