In heat transfer calculations, thermal conductance equals conductivity divided by ________________?
Show answer Hide answer
Answer: D. cm (thickness)
Explanation
Thermal conductance is mathematically defined as the thermal conductivity divided by the material layer thickness. Dividing intrinsic conductivity by distance yields the conductance value for a specific structural slab. This parameter simplifies composite wall calculations by grouping thickness and material properties together. Fourier's law forms the underlying theoretical basis for calculating both conductivity and structural conductance. The standard unit for thermal conductance in engineering applications is watts per square meter kelvin. Increasing material thickness directly decreases its overall thermal conductance under constant material properties.
Civil engineers evaluate multi-layer building insulation assemblies using individual material thermal conductance values. Refrigeration unit walls utilize low conductance materials to minimize unwanted ambient heat infiltration. Electronic device packaging requires careful conductance calculations to prevent overheating of sensitive components. Time units like hours relate to transient heat transfer rates rather than steady-state structural conductance. Area units are already factored into conductance definitions to normalize heat flow across spatial dimensions. Temperature units measure thermal potential difference rather than the physical thickness dimension of material.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. How does the LMTD of a counter-flow heat exchanger compare to that of a parallel-flow unit_________________?
Show answer Hide answer
Answer: A. higher
Counter-flow heat exchangers maintain a more uniform temperature difference along the entire flow path. A higher log mean temperature difference means greater heat transfer rate for a given surface area. Parallel-flow un...
Q2. German silver is categorized as an alloy of___________________?
Show answer Hide answer
Answer: C. nickel, copper and zinc
German silver is an alloy composed of copper, nickel, and zinc without containing any actual precious silver. The combination creates a lustrous, silvery-white metallic appearance that resembles genuine sterling silver....
Q3. Radiation heat transfer is primarily dependent upon___________________?
Show answer Hide answer
Answer: D. all of the above
Radiation heat transfer depends heavily on the temperature of the emitting and receiving bodies. The physical nature of the body and its surface characteristics dictate radiative energy exchange rates. Surface emissivity...
Q4. Sensible heat represents the thermal energy required to __________________?
Show answer Hide answer
Answer: C. increase the temperature of a liquid of vapour
Sensible heat directly affects molecular kinetic energy, resulting in a measurable temperature rise. During sensible heating, no phase transformation occurs, keeping the substance in a single state. Option C accurately d...
Q5. In convective heat transfer from hot gases to water tubes, a laminar boundary layer exists near the wall despite turbulent core flow; heat transfer across this film occurs via___________________?
Show answer Hide answer
Answer: C. conduction
Even within turbulent pipe flow, a very thin stagnant laminar boundary layer forms directly against the solid wall. Fluid velocity drops to zero at the wall due to no-slip conditions, eliminating turbulent eddies within...
Q6. Heat is closely associated with___________________?
Show answer Hide answer
Answer: C. temperature
Heat is closely associated with temperature because a temperature gradient drives all thermal energy transfer. Thermal energy naturally flows from regions of higher temperature to regions of lower temperature. Temperatur...