For a ladder positioned on a smooth floor and leaning against a vertical wall, the friction force will be___________________?
Show answer Hide answer
Answer: C. upwards at its upper end
Explanation
A ladder on a smooth floor leaning against a wall requires an upward vertical reaction at the top. Equilibrium conditions demand that the upper contact point provides an upward frictional or normal force. This upward force counteracts the downward gravitational pull acting on the center of mass of the ladder. Ladders leaning against vertical surfaces create static equilibrium problems involving friction and moments. A smooth floor provides no horizontal frictional resistance, placing the entire burden on the upper wall contact. Resolving vertical and horizontal force components determines the exact direction of reactive forces at supports.
Pointing towards the wall at the upper end violates the required horizontal equilibrium balance of forces. Moving away from the wall would destabilize the ladder and cause an immediate slip failure. Stating none of the above is wrong because an upward force at the upper end is precisely correct.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. The smallest force needed to pull a body up an inclined plane equals W sin (plane inclination + friction angle) directed along___________________?
Show answer Hide answer
Answer: D. at an angle equal to the angle of friction to the inclined plane
The minimum force required to pull a body up an inclined plane acts at an angle equal to the angle of friction relative to the plane face. Resolving forces parallel and perpendicular to the inclined plane proves that thi...
Q2. When finding frame stresses via the method of sections, an imaginary cut divides the structure into two segments such that it intersects no more than____________________?
Show answer Hide answer
Answer: B. three members with unknown forces of the frame
When applying the method of sections to solve frame member forces, the imaginary cut should pass through no more than three members. Statics equations for two-dimensional planar structures limit unknown internal forces t...
Q3. Should rain fall against the movement direction of a pedestrian, he must position his umbrella___________________?
Show answer Hide answer
Answer: D. less inclined when standing
When standing still a pedestrian tilts their umbrella further into the rain but when walking forward vector relative velocity applies. Walking forward combines the downward velocity of raindrops with the forward velocity...
Q4. When multiple forces act upon a particle simultaneously, it is feasible _____________________?
Show answer Hide answer
Answer: B. to replace them by a single force
Multiple concurrent forces acting simultaneously on a particle can always be combined and replaced by a single resultant force. Vector addition allows engineers to sum all individual force components into one equivalent...
Q5. The center of gravity for a solid hemisphere sits along its central radius 3r________________?
Show answer Hide answer
Answer: D. at distance — from the plane base or
The center of gravity of a solid hemisphere is located along its central axis at a specific fractional distance from its plane base. Integration of volumetric mass distribution over a hemispherical geometry yields this p...
Q6. A triangle's center of gravity is located at the intersection of __________________?
Show answer Hide answer
Answer: A. concurrence of the medians
The center of gravity of a triangle is located at the intersection point of its three medians. A median is a straight line drawn from any vertex of the triangle to the midpoint of the opposite side. These three medians i...