Eutectoid steel contains this carbon proportion_______________?
Show answer Hide answer
Answer: D. 0.8%
Explanation
Eutectoid steel contains precisely zero point eight percent carbon in its chemical composition. Upon slow cooling from high temperatures, this specific carbon concentration transforms entirely into pearlite. The iron-carbon phase diagram clearly designates this zero point eight percent mark as the eutectoid point. Steel is an alloy of iron and carbon, along with trace amounts of other hardening elements. Eutectoid reactions involve a single solid phase transforming into two distinct solid phases simultaneously. Microstructures of eutectoid steel consist of alternating lamellae of ferrite and cementite called pearlite.
Metallurgists use eutectoid steel as a baseline reference for heat treatment and hardening operations. Blacksmiths and toolmakers rely on the properties of eutectoid carbon steel for high-strength cutting blades. Heat treating carbon steel above and below the eutectoid temperature alters its hardness and tensile strength. Zero point zero two percent carbon represents hypoeutectoid ferrite-rich steels rather than eutectoid steel. Values like zero point six three percent fall into the hypoeutectoid steel classification range. Higher percentages such as one point two percent describe hypereutectoid steels containing excess cementite.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Equivalent water evaporation denotes the evaporation “for a feed water supply at 100°C__________________?
Show answer Hide answer
Answer: A. and its corresponding conversion into dry saturated steam at 100°C and 1.033 kg/cm2
Equivalent evaporation is defined as the amount of water evaporated from a feed-water supply at 100°C into dry saturated steam at 100°C under standard atmospheric pressure. This standardized metric allows comparison of s...
Q2. Equivalent evaporation refers to the water mass evaporated inside a boiler from and at ____________________?
Show answer Hide answer
Answer: B. 100°C
Equivalent evaporation uses 100 degrees Celsius as a universal baseline temperature for fair boiler performance comparisons. Water is assumed to enter and evaporate completely at this exact standard saturation temperatur...
Q3. In S.I. units, the measure of work or energy is_______________?
Show answer Hide answer
Answer: E. joule
In the International System of Units the standard unit for work energy and heat is the joule. One joule is defined as the amount of work done when a force of one newton displaces an object one meter. This SI unit provide...
Q4. The S.I. unit for force is________________?
Show answer Hide answer
Answer: B. newton
The standard S.I. derived unit for force is the newton. One newton is defined as the force required to accelerate a one-kilogram mass at a rate of one meter per second squared. Using the newton ensures consistency across...
Q5. The farad serves as the unit for___________?
Show answer Hide answer
Answer: C. capacitance
The farad is officially designated within the International System of Units as the measure of electrical capacitance. One farad of capacitance stores one coulomb of electrical charge per volt of applied potential differe...
Q6. Engine exhaust pipes are wrapped in insulating material to_________________?
Show answer Hide answer
Answer: C. reduce heat transfer to the engine room
Wrapping engine exhaust pipes in insulation minimizes thermal radiation and convection reducing heat transfer into the engine room. High-temperature exhaust gases carry immense thermal energy that would otherwise overhea...