Air-breathing jet engines generate reactive thrust by expanding__________________?
Show answer Hide answer
Answer: E. highly heated atmospheric air
Explanation
Air-breathing jet engines ingest surrounding atmospheric air through an intake duct at high forward speeds. This ingested air is compressed, mixed with fuel, and ignited in combustion chambers to generate high heat. Expands this highly heated atmospheric air rapidly through a propulsive exhaust nozzle to create forward reactive thrust. Newton's third law of motion dictates that high-velocity exhaust gas expansion creates an equal and opposite reactive force. Air-breathing engines carry only fuel onboard, relying on the atmosphere for the primary working fluid mass. Thermal energy is converted into kinetic energy as gases accelerate through converging-diverging exhaust nozzles.
Option B solids are used in solid rocket propellants, not in standard air-breathing atmospheric jet engines. Option C liquids are used as fuels rather than serving as the primary bulk working fluid expanding for thrust. Option D plasma is utilized in advanced electric ion thrusters rather than conventional air-breathing jet engines.
- Subject
- Engineering
- Category
- Mechanical Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. Within an irreversible gas turbine loop, both cycle efficiency and work ratio are functions of___________________?
Show answer Hide answer
Answer: D. both pressure ratio and maximum cycle temperature
In an irreversible gas turbine loop, internal friction and heat losses affect overall thermal performance. Cycle efficiency and work ratio depend mathematically on both the compressor pressure ratio and maximum temperatu...
Q2. Gas turbines dedicated to stationary electrical generation are typically deployed___________________?
Show answer Hide answer
Answer: B. to supply peak load requirements
Gas turbines can start up and synchronize with electrical grids in minutes. Rapid response capabilities make them ideal for covering sudden electricity demand spikes. Their low capital cost per peak kilowatt offsets thei...
Q3. Gas turbines operate on lean mixtures requiring high air-fuel ratios because______________________?
Show answer Hide answer
Answer: D. to reduce the exit temperature
Gas turbines operate on lean mixtures with high air-fuel ratios for thermal protection. Excess air mixes with combustion gases to lower temperatures entering turbine blading. Lowering exit temperatures prevents metallurg...
Q4. Reciprocating compressor cylinder clearance spaces should be designed to be_________________?
Show answer Hide answer
Answer: B. as small as possible
Reciprocating compressor cylinder clearance spaces must be kept as small as mechanically possible. Minimizing clearance volume reduces the re-expansion of trapped high-pressure gas during the suction stroke. Smaller clea...
Q5. Multi-stage compressors approach isothermal compression behavior through the use of_________________?
Show answer Hide answer
Answer: C. by running compressor at very slow speed
Running a compressor at very slow speeds helps approach isothermal conditions by allowing more time for heat transfer.
Q6. Aviation jet propulsion systems utilize kerosene (paraffin) primarily due to its_________________?
Show answer Hide answer
Answer: D. A. and C. above
Kerosene possesses a high calorific value releasing abundant thermal energy per unit mass. Its low freezing point prevents fuel line blockage during high-altitude cold flights. Combining these traits makes kerosene the d...