A quick sand condition is characterized as a________________?
Show answer Hide answer
Answer: A. type of sand
Explanation
Quick sand is not a distinct soil type, but rather a hydraulic condition where upward seepage pressure equals buoyant unit weight in cohesionless soils.
- Subject
- Engineering
- Category
- Civil Engineering
- Topic
- —
- Difficulty
- medium
Related questions
Q1. In plate load tests conducted to determine soil bearing capacity, the dimensions of the square bearing plate should be_________________?
Show answer Hide answer
Answer: B. between 300 mm and 750 mm
Standard plate load tests utilize square bearing plates sized between 300 mm and 750 mm across. This standardized size range effectively simulates shallow foundation behavior without requiring excessive testing loads. Ge...
Q2. During a triaxial compression test, applying additional deviator stress to the soil sample generates shear stresses across__________________?
Show answer Hide answer
Answer: D. all planes except horizontal and vertical planes
Applying additional deviator stress during a triaxial test disturbs the initial isotropic stress state. Mohr circle mechanics prove that shear stresses act on every inclined plane within the compressed cylinder. Only the...
Q3. The physical properties of a permeant fluid that impact soil permeability include________________?
Show answer Hide answer
Answer: C. both viscosity and unit weight
Permeability depends on both fluid viscosity and unit weight according to governing fluid mechanics equations. Fluid viscosity dictates flow resistance through pore channels, while unit weight influences gravitational dr...
Q4. A triaxial test where drainage is permitted only during the initial cell pressure application stage and locked during deviator stress application is termed__________________?
Show answer Hide answer
Answer: B. consolidated undrained test
A consolidated undrained test permits full drainage during the initial isotropic cell pressure application stage. Drainage valves are securely closed during the subsequent deviator stress loading stage of the test. This...
Q5. Select the correct numerical range for relative density ID________________?
Show answer Hide answer
Answer: D. 0 < ID < 1
Relative density is mathematically defined as a fractional value strictly bounded between zero and one. Natural granular soils always exhibit void ratios lying between their defined maximum and minimum limits. Expressed...
Q6. The relative density of a well-compacted dense sand deposit is approximately equal to_____________?
Show answer Hide answer
Answer: C. 0.95
Relative density quantifies the compactness of cohesionless coarse grained sand deposits. A well compacted dense sand deposit approaches the maximum possible packing density state. Laboratory testing typically reveals re...